Product Color

The product color for D1 is grey only, while golden red and grey for D1 Pro.

Main Control Board Port

The main control board port on the laser module has different pins, 9-pin for D1 Pro and 8-pin for D1, so the laser modules are not exchangeable.

D1 Pro is equipped with position limit switches, a flame detector, and a movement alarm.

The faulty operation will trigger the buzzer and an alarm message will show on the XCS software.

This function will better protect the safety of users.

D1 only supports the movement alarm. If the machine is moved during processing, you will hear the alarm sound.

The maximum processing speed for D1 Pro is 400mm/s, while 100mm/s for D1.

Diode laser module: 5W/10W/20W and 1064nm infrared laser module for D1

Diode laser module: 5W/10W/20W/40W and 1064nm infrared laser module for D1 Pro

The main control boards of D1 and D1 Pro are different and not interchangeable.

D1 and D1 Pro support XCS and LightBurn, but the LightBurn configuration files are different.

If you still have questions about D series machine, please contact xTool tech support for further advice.

Was this page helpful?

74 out of 78 found this helpful

Help Ticket

Use this help ticket to submit your issue. We will respond within 1 business day