This article applies to:
D1 and D1 Pro.
Description
If you use XCS to operate the machine, most of the time, you don't need to deal with the G-code file. However, if you need to use some extra functions or troubleshoot, you may need to put a G-code file into the card or edit the content. This guide will help you find the location of the G-code file.
Instruction
1. Insert the TF card into the reader and plug it into a USB port on a computer.
|
2. On Windows, Go to This PC > Devices and drives > Find the USB drive
|
3. Open the USB drive and find the G-code files. The one named 'tmp.gcode' is the processing file
Note: the processing file is always named 'tmp.gcode'. Only one processing file can exist in the TF card at a time. |
Questions?
Please contact us via support@xtool.com. Let us know what you need.
Mon-Fri,9:00-18:30 PDT
Mon-Fri,9:00-18:30 PDT
vicky@xtool.com
support@xtool.com
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
Irwindale. CA91706