Quick Start Guides in different languages
Note: From the Quick Start Guide, you can view the item list, product structure, specifications, indicators explanation, as well as instructions on device installation, and fundamental maintenance.
xTool F2 unboxing and first use
List of items
xTool F2 | Pipe | Baseplate | Slatted panel |
L-shaped positioning piece | Power adapter | Power cable | USB cable |
Grease | Key (pre-installed) | Screwdriver | Lint-free cloth |
|
| ||
Material pack | Quick Start Guide | Safety Instructions |
|
Meet xTool F2
Product structure
Common machine states and indicator display
Logo indicator | Knob indicator | Machine state |
Solid on |
| Not connected to the software |
| Setting network | |
| Connected to the software | |
| Task completed | |
| Firmware updating | |
| Exceptions occur | |
| Invalid operation | |
Blinking |
| Performing a task |
Going off |
| Enters sleep state if no operation is performed within 10 minutes |
Specifications
Product name | xTool F2 | Size (W × D × H) | 175 mm × 237 mm × 334 mm |
Model | MXF-K005-002 | Input power | 25 V |
Connection mode | Wi-Fi, USB, IP | Working laser | 15 W blue-light diode laser 5 W infrared laser |
Internal working area | 115 mm × 115 mm | Working laser wavelength | Blue-light laser: 445 ± 15 nm Infrared laser: 1064 ± 5 nm |
Maximum processing speed | 6,000 mm/s | Maximum processing height | 120 mm |
Get the machine ready
1. Open the protective enclosure, and install the baseplate in the direction indicated by the arrow.
2. Pull down the field lens protector to remove it.
Tips: Ensure that the protector is removed every time before you use the machine. If you won't use the machine for a long period of time, you can install the protector back to prevent the field lens from getting dusty.
3. Ensure that the emergency stop button is released. If it is pressed, rotate to release it.
Emergency stop button
If an emergency occurs, press the emergency stop button to shut off the machine.
After dealing with the emergency, rotate the emergency stop button to release it.
4. Ensure the key is fully inserted.
Tips: You can use the key either as an access-control key or a remote interlock connector.
Access-control key
Removing the key can disable the machine's processing and related functions.
Remote interlock connector
For detailed instructions, visit support.xtool.com/article/1367.
5. Install the pipe.
Tips: If you need a desktop smoke purifier, purchase one and connect it to xTool F2 as instructed by the user manual.
6. Connect to a power supply.
Use xTool F2
Power on
Press the power button to turn on xTool F2.
Never use the emergency stop button as a power button.
Use the emergency stop button only when an emergency occurs. Using it as a power button to turn on and off the machine may damage it.
Operate xTool F2 with the software
1. Visit s.xtool.com/software to download and install the software developed by xTool.
2. Use the USB cable to connect xTool F2 to your computer, and then connect xTool F2 in the software.
For details about how to use software to operate xTool F2 to process materials, visit support.xtool.com/product/60.
More operations
Manual focus setting
Turn the knob to adjust the height of the laser module. When the red and blue light spots overlap, the focus is successfully set.
Tips: If turning the knob cannot overlap the red and blue spots, visit support.xtool.com/article/2373 for reference, or you can contact customer support for help.
Use accessories
Slatted panel
To cut a material, you are advised to use the slatted panel. It can reduce the areas burned and protect the baseplate during
material processing.
L-shaped positioning piece
You can use the L-shaped positioning piece for batch processing. It helps you place materials in the same position for each
processing task.
Touchscreen controller
Tips: No touchscreen controller is included in the pack.
■ Up/Down button for laser module: Lifts or lowers the laser module during manual focusing.
■ Framing button: Press it once to start or stop framing.
■ Start/Stop button: Press it once to start or stop material processing; press it twice consecutively to repeat the last processing task.
Caution:
1. Before connecting the cable, ensure the power switch is in the OFF position.
2. Ensure that the side with the notch faces upward.
Rotary attachment
Tips: No rotary attachment is included in the pack.
There are three marking lines on the base of xTool F2. Depending on the working mode and level setting of your rotary attachment, align its front bottom edge to the corresponding marking line.
For details about how to use xTool F2 with the rotary attachment, visit support.xtool.com/product/13 for reference.
Caution: Strictly follow the safety instructions to use xTool F2 with the rotary attachment. Set up a safety-controlled area under the guidance of the Laser Safety Officer (LSO), and take sufficient personal protective measures against laser risks.
Maintenance
Caution: Disconnect power before maintaining the product.
Clean the field lens
When laser power attenuation occurs, for example, engraved patterns are shallow or materials can't be cut as expected, the field lens may get dirty. Clean it with the lint-free cloth moistened with alcohol.
Clean the fan module
When smoke runs out of the protective enclosure, the fan module may be blocked by dust. Clean it to ensure proper smoke exhausting.
1. Remove the pipe.
2. Open the cover, and then take out the fan module.
3. Use a brush or other tools to clean both sides of the fan module.
Caution: The fan module can be rinsed with water, but do not soak it. Ensure it is completely dry before reinstalling.
4. Install the fan module back to the main unit.
Lubricate the protective enclosure
If you can't move the protective enclosure up and down smoothly, apply grease to the edges of the two sides.
Tips: For self-purchase, white lithium grease is recommended.
Services & Help
Learn & Community
Copyright © 2025 xTool All Rights Reserved.