What is Engraving Angle and Cross Hatch?
- Engraving angle allows the user to set a different angle for engraving each time when processing, which contains two modes: Fixed or Incremental.
- Fixed: Engraves the material at the set angle for all passes.
- Incremental: Engraves the material at the set angle for the first pass, and increases the angle by the set value for every pass added.
- Cross hatch means that when processing, it will scan once at the angle originally set by the user, and then automatically rotate 90 degrees to scan once more. This function is equivalent to a shortcut way to set the number of processing times and scanning angles.
Processing Effects
Application scope
- Application model: At present, F1 Ultra supports this function.
- Engraving mode: The application scope of advanced settings is vector engraving.
- Processing mode: Process on Flat Surface
How to use it?
#1 Select the processing mode and material name
Note: If you can't find your material in the list, you can click More xTool materials to search among more materials in the Material EasySet Library. If you still can't find the name of your material, you can select User-defined material.
Note: After you select a material from the material list or Material EasySet Library, the software will automatically set parameters for laser processing. The default settings apply to xTool materials. You can adjust the settings based on your needs.
Note: The recommended parameter settings can achieve the best results only when using xTool's materials. If you are using materials from third parties, it is recommended that you conduct a material test array on your own first to obtain the desired effects and parameters. Meanwhile, make sure that the materials are free from moisture or contamination, which may greatly affect the results.
#2 Perform laser focusing
Note: The blue light spot does not move. If the laser module moves up, the red light spot moves towards the left. If the laser module moves down, the red light spot moves towards the right.
Note: xTool F1 Ultra supports auto-focus and manual-focus. Here we use manual-focus. For more information on how to use auto-focus, see Focus the Laser.
#3 Shoot background and design processing objects
icon.
Note: XSC takes a photo of xTool F1 Ultra’s processing area and uses it as the canvas background. You can position processing objects based on the background.
Note: To ensure positioning accuracy, set the laser focus before shooting the background.
#4 Design objects for processing
#5 Set the processing parameters
Note:
This function requires that your XCS version is V2.3 or later;
Cross Hatch may deepen the processing effect.
