Download PDF file (multi-language)

xTool M1 Ultra Hot Foil Pen Kit unboxing and first use

Safety first (important)

Read and get familiar with all safety precautions and procedures before using the product. Strictly follow all safety precautions.

• This product can be used only with xTool M1 Ultra.
• Do not touch the pen point when using the hot foil pen, as it may cause burns.
• After processing, the hot foil pen is still at a high temperature. To store it, cover the hot foil pen tip with the disassembly pen cap, and keep it out of reach of children.

List of items

Unbox xTool M1 Ultra Hot Foil Pen Kit and check the items inside the pack. If you find items missing or broken, please contact us for after-sales support.

Use xTool M1 Ultra Hot Foil Pen Kit

1. Install the hot foil pen

(1) Install the cable bracket

(a) Pull out the x-axis guide rail

(b) Move the basic carriage and multi-function carriage to the middle

(c) Right-align the parts in the two dashed boxes when installing the cable bracket

(d) Fully tighten the two screws

(2) Place the hot foil pen

(a) Remove the cover

(b) Open the clamp

(c) Insert the hot foil pen into the basic carriage

(d) Close the clamp

(e) Secure the cable of the hot foil pen using the cable bracket

(3) Push the x-axis guide rail of xTool M1 Ultra back in place

(a) Push the x-axis guide rail toward the back of xTool M1 Ultra

(b) Move the basic carriage and multi-function carriage to the leftmost position

(4) Use the cable clamp

(a) Use a tissue to clean the right plate inside xTool M1 Ultra

(b) Place the cable clamp positioning guide card next to the screw, and align it with the bottom edge of the right plate

(c) Remove the backing from the cable clamp

(d) Secure the cable of the hot foil pen using the cable clamp

Remove the cable clamp positioning guide card.

Place the connection cable of the hot foil pen on the cable clamp.

(e) Insert the connection cable of the hot foil pen into the rotary attachment port of xTool M1 Ultra

To use with the electrostatic mat, operate as follows.

(a) Use a tissue to clean the right plate inside xTool M1 Ultra

(b) Place the cable clamp positioning guide card next to the screw, and align it with the bottom edge of the right plate

(c) Remove the backing from the cable clamp

(d) Secure the cable of the hot foil pen using the cable clamp

Remove the cable clamp positioning guide card.

Lift the connection cable of the hot foil pen.

Place the connection cable as illustrated.

(e) Insert the connection cable of the hot foil pen into the extension port of the electrostatic mat

2. Place the material to be processed and foil paper

After placing the material to be processed and foil paper, press the button on the hot foil pen to start heating the tip.

3. Change the hot foil pen tip

(1) Open the clamp

(2) Remove the hot foil pen

(3) Insert the disassembly pen cap into the hot foil pen tip

(4) Hold the disassembly pen cap and pull out the hot foil pen tip

(5) Put the hot foil pen tip away

(6) Install another hot foil pen tip as needed

FAQ

When I use the hot foil pen, the hot foiling result becomes poor. Why?

The performance of the hot foil pen may be affected by the following three factors.

1. Processing temperature for foil paper. The processing temperature for foil paper varies according to type. When you use foil paper from other brands with xTool hot foil pen, the hot foiling results may not be satisfactory. It is recommended to use the foil paper provided by xTool.

2. Ambient temperature. Using the hot foil pen in a cold environment may cause it to heat up slowly or fail to reach the appropriate processing temperature. Therefore, it is recommended to use the hot foil pen indoors with a temperature between 10°C and 35°C.

3. Condition of the hot foil pen. If your hot foil pen is damaged, contact our after-sales customer services.