About this video tutorial

• This tutorial provides comprehensive guidance on how to properly lubricate M1 Ultra’s various guide rails and bearings to ensure optimal performance and longevity. The instructions detail the lubrication procedures for the guide rails on the X-axis as well as the bearings within the basic carriage, multi-function carriage, and laser module.

Applicable scenario 

💡Regular maintenance and lubrication of these components are crucial for the smooth operation of M1 Ultra.

Guide rail lubrication

• If the processing module experiences sluggish movement, it may be due to rust on the guide rails. Please lubricate the bearings to resolve this issue.

Bearing lubrication

• This primarily applies to the multi-function carriage. If the blade rotation is sluggish or the cut pattern lines under the dynamic blade carving (i.e., the cutting blade, rotary blade, and foil transfer tip) do not form a complete closed line from start to finish, the bearings inside the multi-function carriage may need lubrication. Please perform bearing maintenance.

Tools needed

Tools	Description
	Lubricating Grease
	2.5mm Hex Screwdriver
	Cotton Swab
	1.5mm Hex Key

Maintenance procedure

Lubricate the bearings inside the basic carriage