Read and get familiar with all safety precautions and measures before using this product. Strictly follow all safety precautions.

Follow the operating principles:
· Check the product for damage every time before you use it. Do not operate it in any way when any damage or defect is found.
· Ensure that the workspace is clean and flat.
· Do not leave the product unattended during operation. Pay attention to whether it is working properly.
· Do not disassemble the product or change its structure in any way without authorization. 
· The machine works properly at the temperature of –10℃ to +35℃ and can be stored at the temperature of –10℃ to +45℃. 
· Ensure that the workspace is open and well-ventilated.
· Be careful when using the product near combustible or heat reactive materials.
· Do not heat press to material longer than recommended.
· Always unplug the product and allow it to cool down before storage.
· Disconnect the power supply when not in use and before servicing or cleaning.
· The product is not intended for use by children 12 years of age and under; or by persons with reduced physical, sensory or cognitive capabilities, or lack of experience, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
· Beware of splashing the product with water.
· Beware of power cables getting tangled, dangling or being pressed under the heating plate.
· This product is not user-serviceable. It must be returned to the factory or repaired by authorized professionals.
· Disconnect the power supply and wait for the heating plate to cool down before maintaining the device.

	Caution, Hot Surface! When you use the device, the heating plate and base operate at high temperatures. Do not touch, or you may get burned. Caution, Hot Surface!	When you use the device, the heating plate and base operate at high temperatures. Do not touch, or you may get burned.
	Caution!	When you use the device, protect yourself from burns or any other injuries.
	For Indoor Use Only	Use the device indoors to avoid water or dust.
	Return the Device to the Base	The temperature of the device is high when it is in operation. It may cause burns, damage surfaces, and even start fires. Place the device on the base when not in use.