Contents

Step 1: Tumbler Placement with RA2 Pro

Step 2: Insert a Reference Line in XCS

Step 3: Framing & Aligning

Step 4: Edit Your Design and Process

How to Precisely Align Your Design with Tumbler's Logo?

Updated Jan 22,2024

To get a perfect engraving effect on tumblers, aligning your custom design with the existing logo is important. This tutorial is tailored to assist you in aligning them using a mix of software settings and manual adjustments (future software updates may streamline this process). Let's dive in!

In this tutorial, we use xTool F1 as an example.

Step 1: Tumbler Placement with RA2 Pro

Position the tumbler in the RA2 Pro, and make sure the logo is facing up. This initial alignment sets the stage for precision throughout the process.

Step 2: Insert a Reference Line in XCS

In XCS, navigate to General Settings and enable the Auto-Snap feature. This feature is a lifesaver for centering your design on the canvas.

Then, insert a line while pressing Shift, and make sure it is centered both vertically and horizontally.

Navigate to Object Setting and select Ignore. This step ensures your machine won't process this reference line.

Step 3: Framing & Aligning

Hit the Framing button and observe the projected lines on the tumbler. If the lines aren't aligning with the logo center, manually adjust the tumbler until they intersect right.

To ensure precision, you can draw a single line on the tumbler. This acts as a guide to guarantee exact alignment.

Step 4: Edit Your Design and Process

Import your own design into XCS as usual, and snap it to the center of the canvas.

Rotate 90 degrees / 270 degrees to ensure the design aligns with the tumbler’s orientation.

Finally, set your parameters as usual, and send the design to your machine for engraving.

Was this page helpful?

4 out of 13 found this helpful

Help Ticket

Use this help ticket to submit your issue. We will respond within 1 business day

Submit a Ticket