For this method, no TF card reader is required. One file can be uploaded at a time.

1. Connect the machine to your computer with Wi-Fi. Refer to this guide on how: Connect the Device Through Wi-Fi

2. Start a Processing Job on XCS. You will see that the file is being uploaded to the card.

4. Process the file under offline mode. Now you can plug the card into the machine, power it on, and wait for the indicator to be stable. Disconnect all the connections and press the start button. The machine will start to process.

Note: The framing function won't be available in the offline processing mode.

For this method, a TF card reader is required. One file can be uploaded at a time.

1. Export the Gcode file from Lightburn. Launch the software, click on the Save Gcode button, and export the file to the desktop.

2. Rename the G-code file. The file saved from Lightburn has a different naming format. You need to rename the file to 'tmp.gcode' so the xTool laser machine can recognize it.

3. Modify the G-code content. Open the Gcode file with a note and add the $I commend in the line shown below. Save the file.