Has anyone else experienced the auto-measure feature on the M1 to be way off? I'm not getting any errors, but the measurments are 2/3 mm larger than the thickness of the material.

The one time I used the feature I set my 3mm balsa wood on fire. Now I just measure everything first, but it's annoying that it doesn't work.

Update:

I used this article: https://support.xtool.com/hc/en-us/articles/10709975657495-Calibrate-the-M1-Auto-measure

I am using the riser base with the honeycomb. My attempts to use the calibration tool have either failed or given me a result where the blue line is not crossing the boxes. Either way, I have not pushed those calibrations to the machine.

I'm concerned I have a hardware issue if the calibration tool is also failing.