Process small-sized materials
Ensure that the removable baseplate is installed on the base, and place the material on the baseplate.
To cut the material, you are advised to place the triangular prism working panel on the baseplate first. Then, place the material on top of the triangular prism working panel.
Note: By using the triangular prism working panel, you can reduce the areas burned during material processing and protect the baseplate. Ensure that the triangular prisms lie towards the smoke outlet.
Process large-sized materials
Remove the removable baseplate, and place xTool F1/xTool F1 Lite on the material to be processed.
Process materials with slopes
Remove the removable baseplate. Hold xTool F1/xTool F1 Lite by its handle on the top and place it on the area to be processed.
Process cylindrical materials
You can use xTool F1/xTool F1 Lite with the rotary attachment to process cylindrical materials.
For details, please refer to this guide for using xTool F1/xTool F1 Lite with the Rotary Attachment.
Services & Help
Learn & Community
Contact Us
Copyright © 2025 xTool All Rights Reserved.