The Processing Modes of M1 and the Relevant Specifications
Updated Jun 5,2024
Updated Jun 5,2024
The Specifications of the Processing Modes:
- No Honeycomb Panel needed:
Laser Flat | Processing Material Size | Maximum Processing Thickness | If the Baseplate Is Required | Supported Processing Modes | Supported Image Types |
385*300mm | 16mm | Yes | Score Engrave Cut | Vector Bitmap |
| Blade Cut /Print&Blade Cut | Processing Material Size | Maximum Processing Thickness | Knife Pressure | If the Baseplate Is Required | Supported Processing Modes | Supported Image Types |
365*300mm | 1.5mm | 45~360g | Yes | Blade Cut | Vector |
- Optional for Honeycomb Panel:
| Open Plane | Processing Material Size | Focusing Range (Initial Position of the Baseplate Is 0) | If the Baseplate Is Required | Supported Processing Modes | Supported Image Types |
385*270mm | -19~16mm | No | Score Engrave Cut | Vector Bitmap |
Laser Cylindrical | Processing Material Size | Focusing Range (Initial Position of the Baseplate Is 0) | If the Baseplate Is Required | Supported Processing Modes | Supported Image Types |
270*385mm | -19~16mm | No | Score Engrave | Vector Bitmap |
Maximum Processing Speed:
Processing Modes | Maximum Speed |
Score | 160mm/s |
Engrave | 250mm/s |
Cut | 160mm/s |
Blade Cut | 80mm/s |
Preview
Was this page helpful?
36 out of 41 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Tags
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Call Us
Telephone Pre-sales : +1(970)638-7030
After-sales : +1(775)587-7760
Email Pre-sales : vicky@info.xtool.com
After-sales : support@info.xtool.com
Service Time Mon-Fri : 7:00 am - 5:30 pm (PT)
Sat-Sun : 8:30 am - 5:30 pm (PT)
Join xTool Squad
Copyright © 2024 xTool All Rights Reserved.