List of items

Desktop smoke purifier	Pipe adapter
Connection cable for xTool F1	Connection cable for xTool M1 Ultra
Power adapter & power cable	Filter pack
Pre-filter	Pipe
User manual

Meet the desktop smoke purifier

Connect the desktop smoke purifier to xTool M1 Ultra

(1) Plug the pipe adapter of xTool M1 Ultra into the smoke inlet of the smoke purifier.

(2) Connect one end of the connection cable for xTool M1 Ultra to the reserved port on xTool M1 Ultra. And connect the other end to the other port on the smoke purifier.

(Optional) Install the pipe to the smoke outlet of the smoke purifier

How to install the pipe adapter?

To install the pipe adapter, stretch the end of the pipe first, and tighten the pipe adapter to the pipe clockwise.

Use the desktop smoke purifier

Turn on the smoke purifier and select the power level by shifting the level adjustment switch.

If you connect the desktop smoke purifier to xTool M1 Ultra

• United mode: When xTool M1 Ultra is detected, the smoke purifier automatically switches to the United mode.

The smoke purifier starts working when xTool M1 Ultra starts processing and continues working for a while long after xTool M1 Ultra stops processing, so as to purify the air.

The continued working time can be set on the XCS software.

• Press: The smoke purifier starts/stops working. When the smoke purifier accepts the united commands from xTool M1 Ultra, it executes the commands from xTool M1 Ultra in priority.

If you disconnect the desktop smoke purifier from xTool M1 Ultra

• Constant mode: You can only press the button to switch the working status of the smoke purifier when xTool M1 Ultra is not detected.
• Press: The smoke purifier starts/stops working.
   

Indicator status description

Maintenance

Meet the filter pack

Replace the filter pack

(1)Press two sides of the lid, open the lid and take out the pre-filter.

(2) Hold the strap of two sides up and take out the used filter pack.

(3) Put the new filter pack and pre-filter into the smoke purifier.

(4) Close the lid.

FAQs

Problem: Under the United mode, the device is processing, but the purifier does not work. Why and what can I do?

Possible causes: The inlet gets blocked. Or There is something in the pipes. Or One or more filters fail to work after long-term use, which is indicated when the buzzer of the purifier sounds.

Solutions:

- Replace the filter(s). Replaceable filters are used in the product. When the buzzer of the machine sounds, you need to clean or replace the filters for the purifier. You can visit xtool.com to buy the filters you need.

- Power off the purifier, open the lid and check whether the inlet is blocked, and then check whether the outlet is choked.