This guide is designed for the xTool M1 Ultra equipped with any laser module and the Air Assist Set.

Overview

• Learn how to successfully integrate your Air Assist Set with xTool M1 Ultra for enhanced laser processing performance.

Operation procedure

1. Connect with Air Assist Set
   • Locate the expansion interface on the back of the xTool M1 Ultra.
   • Connect the Air Assist Set to the interface as illustrated in the image below.
     
2. Attach the air tube:
   • Attach the air tube to the machine’s tube fitting (refer to the image below).
     
3. Enable AUTO mode:
   • Adjust the knob to the AUTO position to activate the AUTO mode, as depicted in the image below
     .
     
4. Adjust Air Assist levels:
   • Note that the default air assist levels are preset to 4 for cutting and 1 for engraving.
   • Customize these levels according to your specific needs, as demonstrated in the image below.
     
     

Knacks for level settings

- Use AUTO Mode for optimal performance:

• For most applications, the AUTO mode setting is generally sufficient under normal conditions.

- Manual adjustment in case of a broken connection cable:

In cases where your cable for accessory connection is damaged, preventing data communication between M1 Ultra and Air Assist Set, AUTO mode won't be operative.

Instead, manually adjust the knob on Air Assist Set to an appropriate position:

• For Laser Cutting: Set to the MAX level.
• For Laser Engraving: Set to level 1.

Help us improve

If this article or video doesn't effectively assist you in resolving the issue, please let us know by clicking the “No” button in the “Was this page helpful?” section below, and leave your feedback in the pop-up suggestion box. Our knowledge base team will review it and consider it for future updates.

Still need help?

If you need any human assistance, please create a ticket by clicking the “Submit a Ticket” button in the “Help Ticket” section below. Our service team will get back to you in 1 business day via E-mail.